Standard & High Pressure Smooth Bore PTFE Hose
Translucent Tube
 
Translucent Smooth Bore PTFE tube used in engine cooling system Specifications:
air bleed, slight levels for tanks etc. • Innercore: Smooth Bore Extruded Translucent PTFE Tube
  • Braid: None
The PTFE tube is compatible with most fluids and is able to operate • Operating Temperature: -54°C to 260°C (-67°F to 500°F)
in high temperature environments.  
   
Supplied as bulk tube or as assemblies with factory attached light  
weight low profile fittings.  
   
Application: Bleed, Sight Tube, Overflows etc.  
   
Unbraided Tube
Hose Part No. Hose Size nom.) Int/Dia. (nom.) 0/Dia. (nom.)
SB-03 3/16" 0.130 0.250
SB-04 1/4" 0.190 0.330
 
Impregnated Glass Fibre Braid
 
• Designed for Low Pressure Applications End Fittings:
• Suitable for Use in Hot Areas Crimp: Available with factory attached crimped fittings for the
• PTFE Impregnated Braid Functions as an Integral Heat ulimate in weight and space saving.`
Sheild The SB series hose fittings are available in Aluminum, Stainless
• Factory Built Assemblies are ALL Pressure Tested Steel and Titanium
   
Applications: Specifications:
Fuel • Innercore: Smooth Bore Extruded PTFE with Static
Bio Fuel and Alternative Fuels (CNG, LPG etc.) Dissipating Liner
Air Jack Systems • Braid: PTFE Impregnated Glass Fibre
Turbo Feed/Drain • Operating Temperature: -54°C to 260°C (-67°F to 500°F)
   
 
Hose Part No. (Static Dissipating)
Hose
Size
Int/Dia.
(nom.)
O/Dia.
(nom.)
Min. Bend
Radius
Max. Op.
Pressure
Min. Burst
Pressure
Weight
    mm ins mm ins mm ins Bar p.s.i     Kg/m
SB-06-S-FC-SD 3/8" 7.87 0.31 12.19 0.48 76.00 3.00 54 800 216 3200 --
 
Stainless Steel High Pressure Braid
 
• Designed for High Pressure Applications End Fittings:
• Suitable for High Impulse Applications Crimp: Available with factory attached crimped fittings for the
• Low Volumetric Expansion ulimate in weight and space saving.
• Very Flexible The HPSB series of fittings are available in Stainless Steel and
• Compatible with Virtually All fluids Titanium
• Static Dissapating Liner Also compatible with the SB series of hose fittings at a reduced
• Factory Built Assemblies are ALL Pressure Tested operating pressure - consult factory
   
Applications: Specifications:
Hydraulics • Innercore: Smooth Bore Extruded PTFE with Static
Pneumatics Dissipating Liner
Fuel • Braid: 304 Series Stainless Steel Bundled Wire
Power Steering • Operating Temperature: -54°C to 204°C (-67°F to 400°F) at Full
  Pressure and Full Vacuum
   
 
Hose Part No.
(Static Dissipating)
Hose
Size
(nom.)
Int/Dia.
(nom.)
O/Dia.
(nom.)
Min. Bend
Radius
Max. Op.
Pressure
Min. Burst
Pressure
Weight
    mm ins mm ins mm ins Bar p.s.i     Kg/m
HPSB-04-S-SD 1/4" 5.64 0.22 9.53 0.37 38.0 1.50 345 5000 1103 16000 0.149
HPSB-06-S-SD 3/8" 7.82 0.31 12.01 0.47 64.0 2.50 345 5000 1103 16000 0.243
 
Convoluted Hose with Halar Braid
 
• Ultra Flexible End Fittings:
• Low Force to Bend SB-04 Crimped Fitting Range
• Lightweight  
• Compatible with Virtually All Fluids Specifications:
• Factory Buit Assemblies are ALL Pressure Tested • Innercore: Convoluted PTFE
  • Braid: Halar
Applications: • Operating Temperature: -54°C to +200°C (-67°F to +392°F)
Breather and Vent Lines  
Reservoir and Drain Lines  
   
 
Hose Part No. Hose Size (nom.) Int/Dia.
(nom.)
O/Dia.
(nom.)
Min. Bend
Radius
Weight
    mm ins mm ins mm ins Kg/m

SC071-26-0-06

1/4" 4.3 0.17 9.5 0.37 16.0 0.63 0.034
 
 
arrow_back arrow_next
1   2   <<                          
Back to Top
 
 
 
 
Site Map About Us Connect Privacy Policy
 
 
Copyright © 2015. Brown & Miller Racing Solutions. All rights reserved.