Protection Sleeves
Abrasion and Thermal Protection
At Brown & Miller Racing Solutions we offer a range of sleeving products to ensure the in-service life of the hose is not affected by mechanical abrasion or areas of excessively high temperature. These products can be applied to the full length of the hose assembly or used to protect specific parts of the assembly such as areas close to exhaust headers.
Abrasion Protection - High Temperature
 

Manufactured from a radiation cross-linked elastomeric material for optimum high temperature resistance and long-term stability. Ideally suited for protecting high performance hose and wiring systems from abrasion.

Resistant to fuels, hydraulic fluids and lubricating oils.

While this sleeve offers excellent abrasion protection consideration should be given to the loss of hose flexibility that may result. On smaller hose sizes the effect is negligible, on larger sizes there will be an effect and if bent tightly creases may form in the sleeve. As well as being unsightly, the creases may also promote kinking in the hose.

Operating Temperature: -75°C to+ 150°C (-103°F to+ 302°F)
Shrink Ration: 2:1
Color:
Black

 
 
Part No. Nom. Size
(Before Shrinking)
Size Selection for Each Hose Type
  ins mm SB Hose AR Hose HPSB
DR25-0.250 1/4" 6.40 -02 --- ---
DR25-0.375 3/8" 9.50 -03 --- ---
DR25-0.500 1/2" 12.7 -04 --- -04
DR25-0.750 3/4" 19.0 -06 & -08 -06 & -08 -06
DR25-1.000 1" 25.4 --- -10 & -12 ---
DR25-1.500 1-1/2" 38.0 --- -16 ---
 
Firesleeve - Light Weight
 

Lightweight firesleeve is a very effective insulator. This silicone covered fiberglass sleeve is available in two colors:
Silver and Black. Designed to protect hose assemblies in areas of high radiant heat its braided construction maintains excellent flexibility over its temperature range of -40°C to +220°C (-40°F to +428°F).

The sleeve is self extinguishing and has excellent fluid resistance. This sleeve can also be used to protect wire harnesses, sensor wires and, due to its elastic structure, small electrical components.

Substitute the suffix 'X' in the part number with the color code as follows:
X=S for Silver
X=B for Black

 
 
Part No. Nom. Int. / Dia. Nom. Wall Thickness Size Selection for Each Hose Type
  ins mm ins mm SB Hose AR Hose HPSB
FSLW-03-X 3/16" 5.0 0.020 0.50 02 & -03 --- ---
FSLW-04-X 1/4" 6.0 0.025 0.65 -04 --- -04
FSLW-08-X 1/2" 12.0 0.030 0.75 -06 & -08 -06 & -08 ---
FSLW-10-X 5/8" 15.0 0.030 0.75 --- -10 ---
FSLW-12-X 3/4" 20.0 0.060 1.50 --- -12 ---
FSLW-16-X 1" 25.0 0.060 1.50 --- -16 ---
FSLW-20-B 1-1/4" 31.75 0.083 2.10 --- -20 ---
 
Heat Reflecting Aluminised Sleeve
 

Aluminized Fiberglass sleeve that acts as an effective heat reflector. Suitable for protecting hose assemblies, electrical cables, control cables and linkages.

Capable of operating in high temperature environments up to 300°C (572°F).

 
 
Part No. Nom. Int. / Dia. Weight
kg / m
Size Selection for Each Hose Type
  ins mm   SB Hose AR Hose HPSB
HR-03-04-FG 5/8" 16.00 0.044 --- -03 & -04 -04
HR-06-FG 11/16" 17.50 .0490 -06 -06 -06
HR-08-FG 3/4" 19.00 0.054 -08 -08 ---
HR-10-FG 13/16" 20.60 .0590 -10 --- ---
HR-12-FG 7/8" 22.00 0.064 -12 --- ---
HR-16-FG 1-1/4" 31.00 0.083 -16 --- ---
HR-20-FG 1-1/2" 38.00 --- -20 --- ---
 
 
 
1
 
arrow_back arrow_next
 
Back to Top
 
 
 
 
Site Map About Us Connect Privacy Policy
 
 
Copyright © 2018. Brown & Miller Racing Solutions. All rights reserved.